Skip to main content
Kell Electricals Ltd
— Resources

Technical guides from the engineers who do the work

Written by the same team that does the sizing, testing, and compliance work on site.

Solar & Energy

How to Size a Hybrid Inverter System in Nigeria

Panel count and battery capacity mean nothing without a real load profile behind them. Here is the sizing logic we actually run.

Read guide

Generator vs. Solar vs. Hybrid: Choosing Backup Power

The right backup system depends on your outage pattern and budget, not which option sounds most modern.

Read guide

EV Charger Installation: What Your Property Needs First

An EV charger is a sustained, high-current load. The question that matters before installation is whether your panel already has room for it.

Read guide

How to Size a Backup Generator: kVA, Load and Fuel

A generator sized from total connected wattage alone is usually wrong. Starting current and fuel logistics matter as much as running load.

Read guide

Common Solar Installation Mistakes We See in Nigeria

Most underperforming solar systems weren't built with bad equipment. They were built without an engineering process behind them.

Read guide

Choosing the Right Solar Battery for Home Backup in Nigeria

There is no single "best" battery. The right chemistry and capacity depend on how you actually plan to use backup power.

Read guide

UPS or Inverter: Which Backup Does Your Home or Office Need?

Both keep the lights on when the grid drops, but they are built for different jobs. Here is how to tell which one fits what you run.

Read guide

Compliance

What NEMSA Compliance Requires for a Commercial Fit-Out

Compliance is not a certificate you buy at the end. It is a set of documented decisions made throughout the electrical scope.

Read guide

Earthing and Lightning Protection: What Owners Should Know

Earthing is invisible when it works, which is exactly why it gets overlooked until equipment starts failing.

Read guide

Cable Sizes for Residential Electrical Installations

The right cable size depends on load, run length, and installation method together. There isn’t one lookup number for "a socket circuit."

Read guide

Electrical Load Estimation for a Residential Building

A wiring design that undersells or overestimates actual demand causes real problems either way. Here is how load estimation is actually done.

Read guide

What You Should Receive at the End of an Electrical Project

The physical installation is only part of the job. These are the records worth asking for before, during and at handover.

Read guide

What Happens During an Electrical Site Assessment

A site assessment is where sizing, pricing and safety decisions start. Here is what is looked at and how to get ready for one.

Read guide

Surge Protection for Homes and Offices: Where It Fits

Voltage spikes damage electronics without any warning. This is how surge protection works and why it sits alongside good earthing, not instead of it.

Read guide

How to Prepare Your Property for an Electrical Installation

A little preparation before the team arrives saves time on site and avoids surprises in the quote. Here is a simple list.

Read guide

How to Compare Electrical Quotes Like for Like

Two quotes for the same job can differ by a lot, and the cheaper one is not always the better deal. These are the questions that make quotes comparable.

Read guide

Maintenance

Signs Your Electrical Panel Needs Upgrading Before It Fails

A distribution panel rarely fails without warning. These are the signs worth acting on before it does.

Read guide

Why Does Your Circuit Breaker Keep Tripping?

A breaker that trips is doing its job. The question is why it keeps having to. Here are the causes we actually find, from most to least common.

Read guide

How Often You Actually Need an Electrical Safety Inspection

Waiting for something to visibly fail means the inspection happens after the risk, not before it. Here is how to think about timing instead.

Read guide

Solar and Battery System Maintenance Checklist

A solar system keeps working quietly, which is why small problems go unnoticed. Here is what is worth checking, and what to leave to a technician.

Read guide

A Practical Generator Maintenance Checklist

A generator that sits idle between outages is the one most likely to fail when you need it. These are the checks worth building into a routine.

Read guide

Security & Automation

CCTV System Planning: Camera Placement and Cabling Basics

Camera count is the least important decision in a CCTV system. Placement and cabling are what actually determine whether it works.

Read guide

How to Choose CCTV Cameras for Home Surveillance

Camera specs on a box rarely tell you whether a system will actually cover your property. These are the factors that do.

Read guide

How Smart Access Control Systems Actually Work

Beyond the smart lock on the front door, access control is a layered system. Here is how the pieces fit together.

Read guide

What Smart Lighting Control Gives You Beyond a Dimmer

The case for smart lighting is usually made on convenience alone. The stronger reasons are elsewhere.

Read guide

Industrial

Three-Phase Power Basics for Facility Managers

A working knowledge of three-phase power helps a facility manager ask the right questions before a fault becomes downtime.

Read guide
Free guide

Home & Property Electrical Warning Signs Checklist

Ten things worth checking before a fault forces the issue. Enter your email and it’s yours — no account, no spam.

— Get started

Scope a job with our team

Tell us what you need built, fixed or installed. We’ll look at it properly and come back with a scoped assessment.

Start a projectCall +234 814 020 5895